Akarsu S, Aktuğ KS

Language: English
References: 24
Page: 93-101
PDF size: 197.90 Kb.

ABSTRACT

The aim of this study was to evaluate the shear bond strength (SBS) of two universal adhesives (Universal Single Bond and All Bond Universal) and a two-step self-etch adhesive system (Clearfil SE Bond) to dentine at various temperatures. Materials and Methods: One hundred and twenty dentin specimens were divided randomly to 12 groups, according to adhesive systems (Universal Single Bond and All Bond Universal, Clearfil SE Bond) and temperature ( 4ºC, 20 ºC, 36ºC, 55ºC) used. Dentin specimens were prepared (n :10, adhesives were applied, and composite cylinders were polymerized. Statistical analysis of the SBS data was performed using Two-way analysis of variance (ANOVA) and Tukey’s Honestly Significant Differences post-hoc test. Results: The Clearfil SE Bond was shown to have higher SBS than the universal adhesives at all temperatures; however, there was no statistically significant difference (P›0.05). In both groups, the lowest SBS values were observed in the samples at 4°C while the highest SBS values were observed in the samples at 55°C. In this case, there was a statistically significant difference (P‹0.05). Conclusions: The results suggest that the effectiveness of an adhesive may increase if it is preheated at 36°C or above before use instead of being used immediately after removal from the refrigerator or at room temperature.

REFERENCES

1. Münchow E. A., Valente L. L., Bossardi M., Priebe T. C., Zanchi C. H., Piva E. Influence of surface moisture condition on the bond strength to dentin of etch-and-rinse adhesive systems. Braz J of Oral Sci 2014; 13: 182-186.

2. Van Meerbeek B, De Munck J, Yoshida Y, Inoue S, Vargas M, Vijay P, et al. Adhesion to enamel and dentin: current status and future challenges. Oper Dent 2003; 28: 215-235.

3. Van Meerbeek B, Yoshihara K, Yoshida Y, Mine A, De Munck J, Van Landuyt K. State of the art of self-etch adhesives. Dent Mater 2011; 27: 17-28.

4. Hanabusa M, Mine A, Kuboki T, Momoi Y, Van Ende A, Van Meerbeek B, et al. Bonding effectiveness of a new ‘multi-mode’ adhesive to enamel and dentin. J Dent 2012; 40: 475-484.

5. Yoshihara K., Yoshida Y., Nagaoka N., Fukegawa D., Hayakawa S., Mine A., et al. Nano-controlled molecular interaction at adhesive interfaces for hard tissue reconstruction. Acta Biomater 2010; 6: 3573-3582.

6. Mutluay M. M., Yahyazadehfar M., Ryou H., Majd H., Do D., Arola D. Fatigue of the resin–dentin interface: A new approach for evaluating the durability of dentin bonds. Dent Mater 2013; 29: 437-449.

7. Chiba Y., Miyazaki M., Rikuta A., Moore B. Influence of environmental conditions on dentin bond strengths of one-application adhesive systems. Oper Dent 2004; 29: 554-559.

8. Toledano M., Osorio R., Albaladejo A., Aguilera F. S., Osorio E. Differential effect of in vitro degradation on resin–dentin bonds produced by self etch versus total etch adhesives. J Biomed Mater Res A: An Official Journal of The Society for Biomaterials, The Japanese Society for Biomaterials, and The Australian Society for Biomaterials and the Korean Society for Biomaterials 2006; 77: 128-135.

9. Perdigão J., Sezinando A., Monteiro P. C. Laboratory bonding ability of a multi-purpose dentin adhesive. Am J Dent 2012; 25: 153-158.

10. Muñoz M. A., Luque I., Hass V., Reis A., Loguercio A. D., Bombarda NHC. Immediate bonding properties of universal adhesives to dentine. J Dent 2013; 41: 404-411.

11. Yoshioka M., Yoshida Y., Inoue S., Lambrechts P., Vanherle G., Nomura Y., et al. Adhesion/decalcification mechanisms of acid interactions with human hard tissues. J Biomed Mater Res: An Official Journal of The Society for Biomaterials and The Japanese Society for Biomaterials. 2002; 59: 56-62.

12. Fukuda R., Yoshida Y., Nakayama Y., Okazaki M., Inoue S., Sano H., et al. Bonding efficacy of polyalkenoic acids to hydroxyapatite, enamel and dentin. Biomaterials 2003; 24: 1861-1867.

13. Loguercio A., Salvalaggio D., Piva A., Klein-Júnior C., de Lr Accorinte M., Meier M., et al. Adhesive temperature: effects on adhesive properties and resin-dentin bond strength. Oper Dent 2011; 36: 293-303.

14. Reis A., Klein-Júnior C., de Souza F. C., Stanislawczuk R, Loguercio A. The use of warm air stream for solvent evaporation: effects on the durability of resin-dentin bonds. Oper Dent 2010; 35: 29-36.

15. Vale M., Afonso F., Borges B., Freitas Jr. A., Farias-Neto A, Almeida E, et al. Preheating impact on the degree of conversion and water sorption/solubility of selected single-bottle adhesive systems. Oper Dent 2014; 39: 637-643.

16. Sadr A., Ghasemi A., Shimada Y., Tagami J. Effects of storage time and temperature on the properties of two self-etching systems. J Dent 2007; 35: 218-225.

17. Hisamatsu N., Atsuta M., Matsumura H. Effect of silane primers and unfilled resin bonding agents on repair bond strength of a prosthodontic microfilled composite. J Oral Rehabil 2002; 29: 644-648.

18. Abate P., Rodriguez V., Macchi R. Evaporation of solvent in one-bottle adhesives. J Dent 2000; 28: 437-440.

19. Daronch M., Rueggeberg F., De Goes M., Giudici R. Polymerization kinetics of pre-heated composite. J Dent Res 2006; 85: 38-43.

20. Blalock J. S., Holmes R. G., Rueggeberg F. A. Effect of temperature on unpolymerized composite resin film thickness. J Prosthet Dent 2006; 96: 424-432.

21. Pazinatto F. B., Marquezini Jr. L., Atta MT. Influence of Temperature on the Spreading Velocity of Simplified Step Adhesive Systems. J Esthet Restor Dent 2006; 18: 38-46.

22. De Munck Jd, Van Landuyt K., Peumans M., Poitevin A., Lambrechts P., Braem M., et al. A critical review of the durability of adhesion to tooth tissue: methods and results. J Dent Res 2005; 84: 118-132.

23. Korkmaz Y., Gurgan S., Firat E., Nathanson D. Shear bond strength of three different nano-restorative materials to dentin. Oper Dent 2010; 35: 50-57.

24. Nam K.-Y., Kim J.-B., Jang B.-C., Kwon T.-Y., Kim K.-H. Effects of dentin bonding agents on bonding durability of a flowable composite to dentin. Dent Mater J 2007; 26: 224-231.