Degirmenci K, Hayati AM, Sabak C

Language: English
References: 32
Page: 145-153
PDF size: 206.78 Kb.

ABSTRACT

Avoiding biofilm formation on dentures is associated with maintaining the surface properties of acrylic-based dentures. The aim of the study is to investigate the effects of two different cleaning agents (Corega and Klorhex 0.2% chlorhexidine gluconate) on surface roughness of the denture regarding efficacy of curing procedures. A total of sixty disc-shaped specimens were prepared with two different methods as long and short curing processes. The specimens were divided into subgroups according to the immersion solutions (distilled water, Corega tablet group and Klorhex 0.2% chlorhexidine gluconate group) (n=10). The samples were kept in a solution for 8 hours per day during a month. The average Ra (before exposure to the cleanser agent) and Ra (after exposure to the cleanser agent) of each sample was measured. A twoway ANOVA and post hoc Tukey test was used for statistical analysis. The solutions significantly increased the Ra values in both acrylic groups (p‹0.001). While the effect of the distilled water group was significantly lower than Corega and Klorhex in the long-term curing group (p‹0.05), no significant difference was found in the short-term curing group (p𔉄.05). The long-term curing time is highly effective in decreasing the surface roughness of the acrylic base material.

REFERENCES

1. O Brian W. J. Dental material and their selection. 4 ed. Chicago; Quintessence Publishing; 2008.

2. Karakis D., Akay C., Oncul B., Rad Y.A., Dogan A. Effectiveness of disinfectants on the adherence of Candida albicans to denture base resins with different surface textures. J Oral Sci. 2016; 58 (3): 431-7.

3. Ucar Y., Akova T., Aysan I. Mechanical properties of polyamide versus different PMMA denture base materials. J Prosthodont. 2012; 21 (3): 173-6.

4. Bural C., Aktaş E., Deniz G., Ünlüçerçi Y., Bayraktar G. Effect of leaching residual methyl methacrylate concentrations on in vitro cytotoxicity of heat polymerized denture base acrylic resin processed with different polymerization cycles. J Appl Oral Sci. 2011; 19 (4): 306-12.

5. Dogan A., Bek B., Cevik N.N., Usanmaz A. The effect of preparation conditions of acrylic denture base materials on the level of residual monomer, mechanical properties and water absorption. J Dent. 1995; 23 (5): 313-8.

6. Kasina S.P., Ajaz T., Attili S., Surapaneni H., Cherukuri M., Srinath H.P. To evaluate and compare the porosities in the acrylic mandibular denture bases processed by two different polymerization techniques, using two different brands of commercially available denture base resins an in vitro study. J Int Oral Health. 2014; 6 (1): 72-7.

7. Lai C.P., Tsai M.H., Chen M., Chang H.S., Tay H.H. Morphology and properties of denture acrylic resins cured by microwave energy and conventional water bath. Dent Mater. 2004; 20 (2): 133-41.

8. Ayaz E.A., Durkan R., Koroglu A., Bagis B. Comparative effect of different polymerization techniques on residual monomer and hardness properties of PMMAbased denture resins. J Appl Biomater Funct Mater. 2014; 12 (3): 228-33.

9. Barzyk M., Smardz J., Wieckiewicz W. Spectrophotometric evaluation of 5-layer acrylic teeth hyperpigmentation caused by selected food colors: in vitro study. Dent Med Probl. 2018; 55 (2): 167-71.

10. Singh S., Palaskar J. N., Mittal S. Comparative evaluation of surface porosities in conventional heat polymerized acrylic resin cured by water bath and microwave energy with microwavable acrylic resin cured by microwave energy. Contemp Clin Dent. 2013; 4 (2): 147-51.

11. Keller J.C., Lautenschlager E.P. Porosity reduction and its associated effect on the diametral tensile strength of activated acrylic resins. J Prosthet Dent. 1985; 53 (3): 374-9.

12. Bayraktar G., Guvener B., Bural C., Uresin Y. Influence of polymerization method, curing process, and length of time of storage in water on the residual methyl methacrylate content in dental acrylic resins. JJ Biomed Mater Res B Appl Biomater. 2006; 76 (2): 340-5.

13. Barochia J., Kamath S. Evaluation of the Effect of Denture Cleansers on the Surface roughness of hard denture base material: an in vitro study. Indian J Dent Res. 2018; 29 (5): 657-62.

14. Sharma P., Garg S., Kalra N.M. Effect of denture cleansers on surface roughness and flexural strength of heat cure denture base resin-an in vitro study. J Clin Diagn Res. 2017; 11 (8): 94-7.

15. Ozyilmaz O.Y., Akin C. Effect of cleaners on denture base resins' structural properties. J Appl Biomater Funct Mater. 2019; 17 (1): 1-9.

16. Tripathi P., Phukela S.S., Yadav B., Malhotra P. An in vitro study to evaluate and compare the surface roughness in heat-cured denturebased resin and injection-molded resin system as affected by two commercially available denture cleansers. J Indian Prosthodont Soc. 2018; 18 (4): 291-8.

17. Nalbant A.D., Kalkanci A., Filiz B., Kustimur S. Effectiveness of different cleaning agents against the colonization of Candida spp and the in vitro detection of the adherence of these yeast cells to denture acrylic surfaces. Yonsei Med J. 2008; 49 (4): 647-54.

18. Durkan R., Ayaz E.A., Bagis B., Gurbuz A., Ozturk N., Korkmaz F.M. Comparative effects of denture cleansers on physical properties of polyamide and polymethyl methacrylate base polymers. Dent Mater J. 2013; 32 (3): 367-75.

19. American dental association: Revised American dental Association Sp. No. 12 for denture base polymers. J Am Dent assoc. 1975; 90 (2): 451-58.

20. Beech D.R. Molecular weight distribution of denture base acrylic. J Dent. 1975; 3 (1): 19-24.

21. Kasina S.P., Ajaz T., Attili S., Surapaneni H., Cherukuri M., Srinath H.P. To evaluate and compare the porosities in the acrylic mandibular denture bases processed by two different polymerization techniques, using two different brands of commerically available denture base resins-an in vitro study. J Int Oral Health. 2014; 6 (1): 72-7.

22. Dogan A., Bek B., Cevik N.N., Usanmaz A. The effect of preparation conditions of acrylic denture base materials on the level of residual monomer, mechanical properties and water absorption. J Dent. 1995; 23 (5): 313-18.

23. Vallittu P.K., Ruyter I.E., Buykuilmaz S. Effect of polymerization temperature and time on the residual monomer content of denture base polymers. Eur J Oral Sci. 1998; 106 (1): 588-93.

24. Rodrigues Garcia R.C., Joane Augusto de S.Jr., Rached R.N., Del Bel Cury A.A. Effect of denture cleansers on the surface roughness and hardness of a microwave-cured acrylic resin and dental alloys. J Prosthodont. 2004; 13 (3): 173-8.

25. Sharma P., Garg S., Kalra N.M. Effect of denture cleansers on surface roughness and flexural strength of heat cure denture base resin-an in vitro study. J Clin Diagn Res. 2017; 11 (8): 94-7.

26. Barochia J., Kamath S. Evaluation of the effect of denture cleaners on the surface roughness of hard denture base materials: an in vitro study. Indian J Dent Res. 2018; 29 (5): 657-62.

27. Peracini A., Machado Andrade I., Oliveira V.C., Macedo A.P., Silva-Lovato C.H., Oliveira Pagnano V., Watanabe E., Oliveira Paranhos H.F. Antimicrobial action and longterm effect of overnight denture cleaners. Am J Dent. 2017; 30 (2): 101-8.

28. Machado A.L., Giampaolo E.T., Vergani C.E., Souza J.F., Jorge J.H. Changes in roughness of denture base and reline materials by chemical disinfection or microwave irradiation: Surface roughness of denture base and reline materials. J Appl Oral Sci. 2011; 19 (5): 521-8.

29. Duyck J., Vandamme K., Krausch-Hofmann S., Boon L., De Keersmaecker K., Jalon E., Teughels W. Impact of denture cleaning method and overnight storage condition on denture biofilm mass and composition: a cross-over randomized clinical trial. PLoS One. 2016; 11 (1): 1-16.

30. Pinto L. de R., Acosta E.J., Távora F.F., da Silva P.M., Porto V.C. Effect of repeated cycles of chemical disinfection on the roughness and hardness of hard reline acrylic resins. Gerodontology 2010; 27 (2): 147-53.

31. Schwindling F.S., Rammelsberg P., Stober T. Effect of chemical disinfection on the surface roughness of hard denture base materials: a systematic literature review. Int J Prosthodont. 2014; 27 (3): 215-25.

32. Jeyapalan K., Kumar J.K., Azhagarasan N.S. Comparative evaluation of the effect of denture cleansers on the surface topography of denture base materials: An in-vitro study. J Pharm Bioallied Sci. 2015; 7 (2): 548-53.