2022, Number 2
<< Back Next >>
Rev Cubana Estomatol 2022; 59 (2)
Does glycerin influence the color stability of composite resin?
Ramírez FL, Colán GPR, Valencia HJJ, Guevara CJO, Morales VR
Language: Spanish
References: 20
Page:
PDF size: 458.61 Kb.
ABSTRACT
Introduction:
The effect of oxygen on the surface of resins at the moment of photopolymerization creates a layer which is susceptible to pigments. The use of glycerin may block this effect.
Objective:
Determine whether there is a difference in the color stability of nanohybrid composite resin subjected to a coloring agent when glycerin is either applied or not applied.
Methods:
Sixty resin disks were distributed into Group 1 (without glycerin) and Group 2 (with glycerin). Photopolymerization was performed for 20 s with a Bluephase®N LED lamp. The first color measurement was taken with an Easyshase®V spectrophotometer, recording the values obtained for L* (luminosity), a* (red-green axis) and b* (blue-yellow axis). The second color measurement was taken after immersion of the samples for one month in Coca-Cola®, maintaining them in an incubator at 37ºC. Statistical data analysis was performed with Student's t test to determine the color stability changes occurring in the two groups and compare them.
Results:
Color stability changes were observed in all the resin samples. Mean distance between initial and final color was ΔE = 6.91 in Group 1 and ΔE = 3.74 in Group 2. A statistically significant difference was found between the two groups analyzed (p < 0.001).
Conclusions:
Glycerin is an effective substance to block the effect of oxygen on the resin surface, preventing the formation of an oxygen-inhibited layer and raising the color stability of the nanohybrid composite resin.
REFERENCES
Ceci M, Viola M, Rattalino D, Beltrami R, Colombo M, Poggio C. Discoloration of different esthetic restorative materials: A spectrophotometric evaluation. Eur J Dent. 2017;11(2):149-56. DOI: 10.4103/ejd.ejd_313_16
Dietschi D, Campanile G, Holz J, Meyer JM. Comparison of the color stability of ten new-generation composites: an in vitro study. Dent Mater. 1994;10(6):353-62. DOI: 10.1016/0109-5641(94)90059-0
Lieberman A, Langwieder B, Brauneis M, Eichberger M, Stawarczyk B. Impact of thermocycling on mechanical properties and discoloration of veneering composite resins after storage in various staining media. J Prosthet Dent. 2021 ;125(6):940-945. DOI: 10.1016/j.prosdent.2020.03.030
Kumar MS, Ajay R, Miskeen-Sahib SA, Chittrarasu M, Navarasu M, Ragavendran N, et al. Color stability assessment of two different composite resins with variable immersion time using various beverages: An In vitro study. J Pharm Bioallied Sci. 2017;9(Suppl 1):S161-S165. DOI: 10.4103/jpbs.JPBS_149_17
Rizzante FAP, Bombonatti JSF, Vasconcelos L, Porto TS, Teich S, Mondelli RFL. Influence of resin-coating agents on the roughness and color of composite resins. J Prosthet Dent. 2019:122(3):1-5. DOI: 10.1016/j.prosdent.2019.05.011
Shawkat ES, Shortall AC, Addison O, Palin WM. Oxygen inhibition and incremental layer bond strengths of resin composites. Dent Mater. 2009;25(11):1338-46. DOI: 10.1016/j.dental.2009.06.003
Yatabe M, Seki H, Shirasu N, Sone M. Effect of the reducing agent on the oxygen-inhibited layer of the cross-linked reline material. J Oral Rehabil. 2001;28(2):180-5. DOI: 10.1046/j.1365-2842.2001.00634.x
Suh BI. Oxygen-inhibited layer in adhesion dentistry. J Esthet Restor Dent. 2004;16(5):316-23. DOI: 10.1111/j.1708-8240.2004.tb00060.x
Bertolo MVL, Sinhoreti MAC, Rontani JP, De-Albuquerque PPAC, Schneider LFJ. O uso do gel de glicerina melhora a estabilidade de cor de resinas compostas? Rev Odontol UNESP. 2018;47(4):256-60. DOI: 10.1590/1807-2577.07618
Strnad G, Kovacs M, Andras E, Beresescu L. Effect of Curing, Finishing and Polishing Techniques on Microhardness of Composite Restorative Materials. Procedia Technol. 2015;19:233-8. DOI: 10.1016/j.protcy.2015.02.034
Park HH, Lee IB. Effect of glycerin on the surface hardness of composites after curing. J Korean Acad Conserv Dent. 2011;36(6):483-9. DOI: 10.5395/JKACD.2011.36.6.483
Pampulha I, Pitta-Lopes J, Chasqueira A, Portugal J, Arantes-Oliveira S. Inibição da polimerização de resinas compostas por materiais usados como matrizes oclusais. Rev Port Estomatol Cir Maxilofac. 2015;56(1):51-7. DOI: 10.1016/j.rpemd.2014.12.001
Mina NR, Baba NZ, Al-Harbi FA, Elgezawi MF, Daou M. The influence of simulated aging on the color stability of composite resin cements. J Prosthet Dent. 2019;121(2)306-10. DOI: 10.1016/j.prosdent.2018.03.014
Malhotra N, Shenoy RP, Acharya S, Shenoy R, Mayya S. Effect of three indigenous food stains on resin-based, microhybrid-, and nanocomposites. J Esthet Restor Dent. 2011;23(4):250-7. DOI: 10.1111/j.1708-8240.2011.00431.x
. Commission Internationale de l’Eclairage (CIE). Colorimetry. Technical Report CIE Publication No.15:2004, 3rd ed. Central Bureau of the CIE, Vienna, Austria, 2004.
Samra APB, Pereira SK, Delgado LC, Borges CP. Color stability evaluation of aesthetic restorative materials. Braz Oral Res. 2008 [acceso: 30/09/2020];22(3):205-10. Disponible en: Disponible en: https://www.scielo.br/pdf/bor/v22n3/a03v22n3.pdf 16.
Mitra SB, Wu Dong, Holmes BN. An application of nanotechnology in advanced dental materials. J Am Dent Assoc. 2003;134(10):1382-90. DOI: 10.14219/jada.archive.2003.0054
Ardu S, Duc O, Di Bella E, Krejci I. Color stability of recent composite resins. Odontology. 2017;105(1):29-35. DOI: 10.1007/s10266-016-0234-9
Kim H. Evaluation of the repeatability and matching accuracy between two identical intraoral spectrophotometers: an in vivo and in vitro study. J Adv Prosthodont. 2018;10(3):252-8. DOI: 10.4047/jap.2018.10.3.252
Tsiliagkou A, Diamantopoulou S, Papazoglou E, Kakaboura A. Evaluation of reliability and validity of three dental color-matching devices. Int J Esthet Dent. 2016;11(1):110-24. PMID: 26835527