medigraphic.com
ISSN 1659-1046 (Print)
Odovtos - International Journal of Dental Sciences

2022, Number 2

<< Back Next >>

Odovtos-Int J Dent Sc 2022; 24 (2)

How a 16% Carbamide Peroxide Home Bleaching Agent Affects the Surface Properties of Chairside CAD/CAM Materials?

Serin-Kalay T, Zaim B

Language: English
References: 38
Page: 57-68
PDF size: 239.29 Kb.


ABSTRACT

Surface changes of restorative materials after bleaching have clinical importance in terms of the durability and survival of restorations. This study aimed to evaluate the effect of home bleaching on the surface roughness, microhardness, and surface analysis of four different types of chairside computer-aided design and computer-aided manufacturing (CAD/CAM) materials. Specimens were prepared from composite resin (Brilliant Crios: BC), resin nanoceramic (Lava Ultimate: LU), polymer-infiltrated ceramic-network (Vita Enamic: VE), and zirconia-reinforced lithium silicate glass-ceramic (Vita Suprinity: VS) CAD/CAM materials. Specimens were polished using 800, 1000, 1200, and 2000 grit SiC papers. Each restorative material was randomly divided into two groups; control and bleaching (n=10). The 16% carbamide peroxide bleaching agent (Whiteness Perfect 16%, FGM) was applied to the specimens for 4 h/day for 14 days. Surface roughness values (Ra) were obtained using a profilometer, and microhardness values (VHN) were obtained using a Vickers microhardness test. Surface analysis of specimens was evaluated by scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX). Data were analyzed Two-way ANOVA and Fisher’s Least Significant Difference (LSD) test (p‹0.05). After bleaching, the surface roughness of BC (p‹0.001) and VE (p‹0.032) significantly increased. Bleaching did not significantly affect the microhardness of CAD/CAM materials. SEM evaluation showed material-dependent surface damages after bleaching procedures. The effect of 16% carbamide peroxide home bleaching agent on surface roughness and microhardness of chairside CAD/CAM materials is material-dependent. Before bleaching, restorative materials should be protected by applying a protective barrier and contact with the bleaching agent should be minimized. Also, after bleaching, the restoration surface should be carefully inspected, and re-polishing might be beneficial.


REFERENCES

  1. Polydorou O., Mönting J.S., Hellwig E.,Auschill T.M. Effect of in-office toothbleaching on the microhardness of six dentalesthetic restorative materials. Dent Mater.

  2. 2007; 23:153-58.2. Malkondu Ö., Yurdagüven H., Say E.C.,Kazazoǧlu E., Soyman M. Effect of bleachingon microhardness of esthetic restorativematerials. Oper Dent. 2011; 36: 177-86.

  3. Auschill T.M., Hellwig E., Schmidale S.,Sculean A., Arweiler N.B. Efficacy, sideeffectsand patients’ acceptance of differentbleaching techniques (OTC, in-office,at-home). Oper Dent. 2005; 30: 156-63.

  4. Greenwall-Cohen J., Francois P., Silikas N.,Greenwall L., Le Goff S., Attal J.P. The safetyand efficacy of ‘over the counter’ bleachingproducts in the UK. Br Dent J. 2019; 226: 271-276.

  5. American Dental Association (ADA). Tooth whitening/bleaching: treatment considerations for dentists and their patients. 2009.

  6. Basting R.T., Y Fernandéz C.F., Ambrosano GMB, Campos I.T. Effects of a 10% Carbamide Peroxide Bleaching Agent on Roughness and Microhardness of Packable Composite Resins. J Esthet Restor Dent. 2005; 17: 256-62.

  7. Okte Z., Villalta P., García-Godoy F., Lu H., Powers J.M. Surface hardness of resin composites after staining and bleaching. Oper Dent. 2006; 31: 623-28.

  8. Hannig C., Duong S., Becker K., Brunner E., Kahler E., Attin T. Effect of bleaching on subsurface micro-hardness of composite and a polyacid modified composite. Dent Mater. 2007; 23: 198-203.

  9. Cho S.D., Bulpakdi P., Matis B.A., Platt J.A. Effect of bleaching on fracture toughness of resin composites. Oper Dent. 2009; 34: 703-08.

  10. Yu H., Zhang C.Y., Cheng S.L., Cheng H. Effects of bleaching agents on dental restorative materials: A review of the literature and recommendation to dental practitioners and researchers. J Dent Sci. 2015; 10: 345-51.

  11. Karakaya I., Cengiz-Yanardag E. Changes in Optical Characteristics and Surface Topography of CAD/CAM Materials after Bleaching Applications: An AFM Evaluation. J Prosthodont. 2020; 29: 226-36.

  12. Wendler M., Kaizer M.R., Belli R., Lohbauer U., Zhang Y. Sliding contact wear and subsurface damage of CAD/CAM materials against zirconia. Dent Mater. 2020; 36: 387-401.

  13. Strasser T., Preis V., Behr M., Rosentritt M. Roughness, surface energy, and superficial damages of CAD/CAM materials after surface treatment. Clin Oral Investig. 2018; 22: 2787-97.

  14. Backer A.D., Münchow E.A., Eckert G.J., Hara A.T., Platt J.A., Bottino M.C. Effects of Simulated Gastric Juice on CAD/CAM Resin Composites-Morphological and Mechanical Evaluations. J Prosthodont. 2017; 26: 424-31.

  15. Fathy S.M., Swain M. V. In-vitro wear of natural tooth surface opposed with zirconia reinforced lithium silicate glass ceramic after accelerated ageing. Dent Mater. 2018; 34: 551-59.

  16. Tinastepe N., Malkondu O., Iscan I., Kazazoglu E. Effect of home and over the contour bleaching on stainability of CAD/CAM esthetic restorative materials. J Esthet Restor Dent. 2020; (April): 1-11.

  17. Rea F.T., Roque A.C.C., Macedo A.P., de Almeida R.P. Effect of carbamide peroxide bleaching agent on the surface roughness and gloss of a pressable ceramic. J Esthet Restor Dent. 2019; 31: 451-56.

  18. Karakaya I., Cengiz E. Effect of 2 Bleaching Agents with a Content of High Concentrated Hydrogen Peroxide on Stained 2 CAD/CAM Blocks and a Nanohybrid Composite Resin: An AFM Evaluation. Biomed Res Int. 2017; 2017: 1-11.

  19. Demir N., Karci M., Ozcan M. Effects of 16% Carbamide Peroxide Bleaching on the Surface Properties of Glazed Glassy Matrix Ceramics. Biomed Res Int. 2020; 2020: 1-7.

  20. Attin T., Hannig C., Wiegand A., Attin R. Effect of bleaching on restorative materials and restorations - A systematic review. Dent Mater. 2004; 20: 852-61.

  21. Sharafeddin F., Kowkabi M., Shoale S. Evaluation of the effect of home bleaching agents on surface microhardness of different glass-ionomer cements containing hydroxyapatite. J Clin Exp Dent. 2017; 9: 1075-80.

  22. Hubbezoglu I., Akaoǧlu B., Dogan A., et al. Effect of bleaching on color change and refractive index of dental composite resins. Dent Mater J. 2008; 27: 105-16.

  23. Kamangar S.S.H., Kiakojoori K., MirzaiiM., Fard M.J.K. Effects of 15% carbamideperoxide and 40% hydrogen peroxide on themicrohardness and color change of compositeresins. J Dent (Tehran). 2014; 11: 196-209.

  24. Curtis A.R., Palin W.M., Fleming G.J.P.,Shortall A.C.C., Marquis P.M. The mechanicalproperties of nanofilled resin-basedcomposites: Characterizing discrete fillerparticles and agglomerates using a micromanipulationtechnique. Dent Mater. 2009; 25:180-87.

  25. da Silva E.M., Gonçalves L., GuimarãesJ.G.A., Poskus L.T., Fellows C.E. The diffusionkinetics of a nanofilled and a midifilledresin composite immersed in distilled water,artificial saliva, and lactic acid. Clin OralInvestig. 2011; 15: 393-401.

  26. Bailey S.J., Swift E.J. Effects of homebleaching products on composite resins.Quintessence Int (Berl). 1992; 23: 489-94.

  27. Türker S.B., Bişkin T. The effect of bleachingagents on the microhardness of dental aestheticrestorative materials. J Oral Rehabil.2002; 29: 657-61.

  28. Campos I., Briso A.L.F., Pimenta L.A.F.,Ambrosano C. Effects of Bleaching withCarbamide Peroxide Gels on Microhardnessof Restoration Materials. J Esthet RestorDent. 2003;15: 175-83.

  29. García-Godoy F., García-Godoy A., García-Godoy F. Effect of bleaching gels on thesurface roughness, hardness, and micromorphologyof composites. Gen Dent. 2002; 50:247-50.

  30. Nathoo S.A., Chmielewski M.B., KirkupR.E. Effects of Colgate Platinum ProfessionalToothwhitening System on microhardness ofenamel, dentin, and composite resins. CompendContin Educ Dent. 1994; 17: 627-30.

  31. Mujdeci A., Gokay O. Effect of bleachingagents on the microhardness of tooth-coloredrestorative materials. J Prosthet Dent. 2006;95: 286-89.

  32. Taher N.M. The effect of bleaching agents onthe surface hardness of tooth colored restorativematerials. J Contemp Dent Pract. 2005;6: 18-26.

  33. Pruthi G., Jain V., Kandpal H.C., MathurV.P., Shah N. Effect of Bleaching on ColorChange and Surface Topography of CompositeRestorations. Int J Dent. 2010; 2010: 1-7.

  34. Yap A.U.J., Tan S.H.L., Wee S.S.C., LeeC.W., Lim E.L.C., Zeng K.Y. Chemicaldegradation of composite restoratives. J OralRehabil. 2001; 28: 1015-21.

  35. Lambert H., Durand J.C., Jacquot B., FagesM. Dental biomaterials for chairside CAD/CAM: State of the art. J Adv Prosthodont.2017; 9: 486-95.

  36. Vichi A., Fabian Fonzar R., Goracci C.,Carrabba M., Ferrari M. Effect of finishingand polishing on roughness and gloss oflithium disilicate and lithium silicate zirconiareinforced glass ceramic for CAD/CAMsystems. Oper Dent. 2018; 43: 90-100.

  37. Moraes R.R., Marimon J.L.M., SchneiderL.F.J., Correr Sobrinho L., Camacho G.B.,Bueno M. Carbamide peroxide bleachingagents: Effects on surface roughness ofenamel, composite and porcelain. Clin OralInvestig. 2006;10: 23-8.

  38. Li Q., Yu H., Wang Y. Colour and surfaceanalysis of carbamide peroxide bleachingeffects on the dental restorative materials insitu. J Dent. 2009; 37: 348-56.




2020     |     www.medigraphic.com